Foam System
فوم آتش نشانی ترکیبی از آب و ماده فوم می باشد که معمولاً پس از ترکیب آب و مایع فوم می بایستی به خوبی هوادهی شود تا مخلوط فوم منبسط شود.
شرکت ساختار انرژی ژرف به عنوان نماینده انحصاری شرکت Sabo اسپانیا در زمینه تجهیزات فوم فعالیت می نماید.
fire fighting & fire alarm systems
Foam System
سیستم های اطفاء حریق بر اساس فوم معمولاً برای مواد کلاس B مورد استفاده قرار می گیرد. در ایران طراحی این سیستم بر اساس استاندارد NFPA صورت می پذیرد. فوم آتش نشانی ترکیبی از آب و ماده فوم می باشد که معمولاً پس از ترکیب آب و مایع فوم می بایستی به خوبی هوادهی شود تا مخلوط فوم منبسط شود. نسبت ترکیب آب و فوم به قرار زیر می باشد:
%1 مایع فوم + %99 آب : برای اطفاء حریق کلاس A
%3 مایع فوم + %97 آب : برای اطفاء حریق مواد نفتی
%6 مایع فوم + %94 آب : برای حلالها و مواد الکلی
بر اساس مقدار توسعه و انبساط فوم تقسیم بندی زیر صورت می گیرد:
فوم کم توسعه (Low Expansion Foam )
فوم میان توسعه (Meduim Expansion Foam )
فوم پرتوسعه (High Expansion Foam )
Foam system
Bladder Tank
The Bladder Tank is an essential part of the Bladder Tank Proportioning System.
They require no external power, other than a supply of water to ensure proper operation.
The Vertical and Horizontal Bladder tanks are designed and constructed in accordance with the latest revisions of ASME code Section VIII for unfired pressure vessels.
They have a working pressure of 12 bar and they are tested to 17.2 bar. Used with a ratio controller, this system is designed to inject foam concentrate into a suitable water supply and to automatically proportion foam concentrates over a wide range of flows and pressures.
- Type: Horizontal or Vertical
- Max. working pressure: 12 bar
- Body material: carbon steel ASTM A 516 gr.70
- Available Size: Project Requirement
foam system
foam system
Foam system
Foam Dosing
Foam Dosing are particularly suited for use in systems with low start flows, for example sprinkler systems. They require no external power.
Piston pumps are also very suited for low and medium viscosity concentrates. The unit shall be placed in such a manner that the concentrate has a free flow down from the foam tank to the dosing pump.
A typical fixed installation with a Piston pump model is often where a customer prefers the characteristics of Piston pumps, use low to middle viscosity concentrates and work on a wide flow range. The unit shall be placed in such a manner that the media concentrate has a free flow down from the tank to the dosing pump.
- Type: Piston Pump Type
- Min. / Max. working pressure: 4 bar /12 bar
- Body material: Aluminum / Bronze
- Available Size: 180 Lpm ~ 8000 Lpm
Foam system
Foam Chamber
Foam Chamber is designed to discharge expanded foam directly onto the surface of a flammable or combustible liquid for fire extinguishment. Classified as a Type II discharge device in accordance with NFPA Standard 11, foam chamber delivers low expansion foam directly onto the fuel surface. Minimizing submergence and agitation increases the effectiveness of the foam blanket, resulting in more efficient operation, and superior extinguishing capabilities.
Foam Chamber is used in one of the most common applications to protect vertical fixed roof (cone) liquid storage tanks, with or without internal floating roof with the low expansion foam system
- Application: Foam Solution, 1%, 3%
- Working pressure: 3 ~ 7 bar
- Body Material: ASTM A53 Pipe
- Available Size: 2” ~ 6” (for more information find catalog)
foam system
foam system
Foam system
Foam Sprinkler
Pendent Foam Nozzles are air-aspirating foam discharge outlet sprinklers designed for use in foam-water deluge systems.
They are designed for flammable liquid risks where it is desired to apply foam from overhead sprinklers and where follow-up with plain water in a standard spray sprinkler pattern is necessary.
- Application: Foam Solution, 3%, 6%
- Connection Size: ½” or ¾” BSPT (NPT)
- Working pressure: 3 ~ 7 bar
- Body Material: Brass
Foam system
Rim Seal Foam Pourer
Rim Seal Foam Pourer is designed to discharge fully aspirated foam directly to the annular seal area of the open top floating roof storage tanks for fire or vapor suppression. Fully aspirated foam
provides the most effective performance.
Foam pourer design provides protection from the wind, allowing the aspirated foam to gently discharge onto the protected area of the floating roof tank.
- Application: Foam Solution, 1%, 3%, 6%
- Expansion Ratio: 6:1 15:1 at 5 bar (depending on Foam Type)
- Working pressure: 3 ~ 8 bar
- Body Material: ASTM A53-Sch Standard
- Available Size: 2”, 2 ½” (for more information find catalog)
foam system